How to Update Firmware via Web UI

How to Update Firmware via Web UI

Prerequisites

  1. Device web interface access
  2. Latest firmware file
  3. Stable network connection

Update Process

  1. Direct Steps
  2. Access the device web interface
  3. Navigate to System > Update
  4. Click "Choose File" and select firmware
  5. Click "Update" button
  6. Accept the reboot prompt

Important Notes

  1. Ensure stable power supply during update
  2. Do not close browser window during update
  3. Update process includes automatic device reboot
  4. Total process takes approximately 5-10 minutes

Troubleshooting

If update fails:
  1. Verify firmware file is correct for your device model
  2. Check network connection stability

Remote Access Considerations

  1. Ensure backup network access method available
  2. Verify device can be accessed after reboot
  3. Have recovery plan if connection is lost

Author: Eldar Mustafin

    • Related Articles

    • How to Update Firmware via USB

      Prerequisites Device with USB update support USB flash drive (FAT32 formatted) Key file for authentication Latest firmware file Device access for initial setup Device Preparation Enable USB Update Feature Access device web interface Navigate to ...

    • How to Update Firmware via RCMS

      Prerequisites 1. Device must be: Registered in RCMS platform Connected to RCMS Online status Update Process Step-by-Step Instructions 1. Access RCMS platform 2. Locate the device: Through Groups navigation OR use "View All Devices" and search by: ...

    • How to Setup Ping Detection via Web UI

      Overview This guide explains how to configure ping detection for monitoring network connectivity on your cellular gateway device. Prerequisites Web UI access to the device Network server addresses for ping detection WWAN (cellular) interface ...

    • How to Enable RCMS via Web UI

      Prerequisites Device web interface access RCMS server details (if using private network): Server URL/IP Port number Network ping server address Configuration Process Step-by-Step Instructions 1. Access device web interface 2. Navigate to Services > ...

    • How to Enable RCMS via Configuration File

      Overview This guide explains how to configure RCMS settings using a config.xml file, which can be deployed via: Web UI USB drive Complete RCMS Configuration Block <rcms> <enable>true</enable> <rlink_enable>true</rlink_enable> ...