Use RobustOS CLI show commands to display configuration settings. Connect to the CLI with an authorized account; see Get started with the RobustOS CLI.
Output shown below was observed on an R5030 running RobustOS 5.6.0. Configuration, installed features and results can differ by device. Some features require the corresponding hardware or configuration.
Use show <group> all to view a group's settings. For a narrower query, replace all with an option from the table. For example, use show ddns hostname to query the DDNS hostname. Some options need an index and further fields. The table lists direct options; it does not list every nested path.
At the CLI prompt, type each line below in turn, pressing ? at the end to see the available next item. Help appears without pressing Enter. Press Ctrl-U to clear the current input before trying the next line:
show lan ?
show lan network ?
show lan network 1 ?
show lan network 1 dhcp ?For example, after show lan network ?, one device displayed this index hint:
Integer Index (1..1)The permitted index range may differ on your device.
In this example, help identifies network as an option, requests an index, and lists dhcp and then pool_start. Index 1 is the example entry; use the index and options available on your device. Enter the complete command to query it:
# show lan network 1 dhcp pool_start
lan.network[1].dhcp.pool_start = 192.168.0.2The result reports the configured DHCP pool start for LAN network entry 1. Values and available options depend on the device and configuration.
In group output, name = value shows a setting and its value. Braces group related settings; an id identifies a displayed entry. Nested blocks show their settings within a parent group.
If a query returns an error, check its spelling, required index and the relevant configuration. An absent list entry can return an error. A response with no output or an error alone does not establish that a feature is unsupported. For runtime information, see RobustOS CLI Status Command Reference.
| Command | Description | Subcommands |
|---|---|---|
show all | Display all configuration settings. Example output is not available. | No further option. |
show ddns all | Display dynamic DNS settings. | all, enable, server_type, hostname, username, password, url, tries, checkip, enable_fake_address |
show email all | Display email service settings. | all, enable, tls_enable, starttls_enable, outgoing_server, port, timeout, auth_login, username, password, from, subject |
show event all | Display event settings. | all, csq_threshold, rsrp_threshold, temperature_threshold, notice_group |
show ntp all | Display time synchronization settings. | all, timezone, expert_setting, client_enable, primary_server, secondary_server, update_interval, network_port, server_enable, nitz_enable, nitz_update_interval |
show rcms all | Display RCMS settings. | all, enable, rlink_enable, rvpn_enable, detail_enable, frpc_log_enable, reg_addr_type, reg_addr, port, ipv6_preferred, keepalive, keepalive_custom, read_interval, upload_frequency, gps_report_method, gps_distance_threshold, pingenable, primary_server, timeout, count, system_startup, system_time_updated, config_changed, cellular_network_type_changed, cellular_data_stats_clear, cellular_data_stats_daily, cellular_data_traffic_overflow, poor_signal_quality, link_switch, wan_up, wan_down, wan_data_stats_clear, wan_data_stats_daily, wan_data_traffic_overflow, wlan_up, wlan_down, wlan_data_stats_clear, wlan_data_stats_daily, wlan_data_traffic_overflow, wwan_up, wwan_down, ipsec_up, ipsec_down, openvpn_up, openvpn_down, lan_port_up, lan_port_down, eth_up, eth_down, usb_connected, usb_removed, ddns_update_success, ddns_update_fail, sms_received, sms_cmd_executed, di1_on, di1_off, di1_counter_overflow, di1_counter, di2_on, di2_off, di2_counter_overflow, di2_counter, di3_on, di3_off, di3_counter_overflow, di3_counter, di4_on, di4_off, di4_counter_overflow, di4_counter, excessive_temperature |
show reboot all | Display scheduled reboot settings. | all, period, daily_time, reboot_list |
show req_auth all | Display role management settings. | all, settings |
show security all | Display access control settings. | all, enable, fail_count |
show sms all | Display SMS service settings. | all, sms_mgmt_enable, auth_type, sms_mgmt_phonenum, dcs |
show ssh all | Display SSH service settings. | all, enable, port, disable_passwd_login |
show syslog all | Display system logging settings. | all, enable, level, save_position, log_to_remote, add_identifier, remote_ip, remote_port, backup_remote_ip, backup_remote_port |
show system all | Display system settings. | all, device_name, usr_led_type |
show user_management all | Display user management settings. | all, username, password, usb_key, root_password, user_list, idle_timeout |
show web_server all | Display web server settings. | all, http_port, https_port, http_redirect_to_https |
| Command | Description | Subcommands |
|---|---|---|
show captive_portal all | Display Captive Portal settings. | all, enable, www_position, client_network, client_netmask, home_url, redir_url, download_volume, upload_volume, maxdown_bw, maxup_bw, session_timeout, idle_timeout, total_time, reset_every, start_time, en_alert, enable_log, allowed_networks, domainaddress, allowed_clients, expert, probe_domains |
show ethernet all | Display Ethernet port settings. | all, port_setting |
show firewall all | Display firewall settings. | all, filtering_enable, default_filter_policy, remote_input_policy, local_input_policy, remote_ssh_access, local_ssh_access, remote_telnet_access, local_telnet_access, remote_http_access, local_http_access, remote_https_access, remote_ping_respond, dos_defending_enable, vpn_nat_traversal_enable, ping_forward_limit, white_list, filter_list, mac_ip_binding, sip_enable, ftp_enable, dmz_enable, dmz_host, dmz_source, port_mapping, nat_list, masq_list, ipset_enable, default_input_policy, mac_list_name, mac_list_action, ip_port_list_name, ip_port_list_action, net_list_name, net_list_action, mac_list, ip_port_list, net_list, custom_list, custom_ipv6_list |
show ieee8021x all | Display IEEE 802.1X settings. | all, ieee8021x_list |
show ip_passthrough all | Display IP passthrough settings. | all, enable |
show lan all | Display LAN interface and DHCP settings. | all, network, static_lease_list, multi_ip, vlan |
show link_manager all | Display link manager settings. | all, primary_link, backup_link, backup_mode, revert_interval, emergency_reboot, link |
show policy_route all | Display policy route settings. | all, enable, blink_drop_conn, ignore_dns_for_backup, policy_route_list |
show pppoe_bridge all | Display PPPoE Bridge settings. | all, enable, username, password, lcp_echo_interval, lcp_echo_failure |
show qos all | Display QoS settings. | all, enable, priority, rule |
show route all | Display route settings. | all, static_route |
show wifi all | Display Wi-Fi settings. | all, mode, client_band, region, oem_prefix, oem_content, enable, wireless_mode, bandwidth_20, bandwidth_40, channel_2g, ssid_2g, broadcast_ssid, security_mode, wpa_version, encryption, psk_password, auth_server_addr, auth_server_port, auth_server_secret, key_update_interval, wep_secret, radius_addr, radius_port, radius_secret, max_station_num, beacon_interval, dtim_period, rts_threshold, fragmentation_threshold, tx_rate, tx_rate_11n, tx_power, wmm_enable, short_gi_enable, ap_isolation_enable, debug_level, acl_enable, acl_mode, acl, enable_5g, wireless_mode_5g, bandwidth_5g, bandwidth_5g_ac, bandwidth_5g_ax, channel_5g, ssid_5g, broadcast_ssid_5g, security_mode_5g, wpa_version_5g, encryption_5g, psk_password_5g, auth_server_addr_5g, auth_server_port_5g, auth_server_secret_5g, key_update_interval_5g, wep_secret_5g, radius_addr_5g, radius_port_5g, radius_secret_5g, max_station_num_5g, beacon_interval_5g, dtim_period_5g, rts_threshold_5g, fragmentation_threshold_5g, tx_power_5g, wmm_enable_5g, short_gi_enable_5g, ap_isolation_enable_5g, debug_level_5g, acl_enable_5g, acl_mode_5g, acl_5g |
show wlan all | Display WLAN settings. | all, enable, multi_ap |
| Command | Description | Subcommands |
|---|---|---|
show cellular all | Display cellular and SIM settings. | all, sim |
show smart_roaming all | Display Smart Roaming settings. | all, enable, check_period, rssi_quality_check, rssi_quality_gsm, rssi_quality_wcdma, rssi_quality_lte, rsrp_quality_check, rsrp_quality_lte, rsrp_quality_5g, rsrq_quality_check, rsrq_quality_lte, rsrq_quality_5g, sinr_quality_check, sinr_quality_lte, sinr_quality_lte_pcc, network_delay_check, network_delay, packet_loss_rate_check, packet_loss_rate, primary_server, secondary_server, timeout, tries, use_degraded_networks, period, daily_time, preferred_operator_list |
show sr_site_survey all | Display Smart Roaming site survey settings. | all, site_survey_enable, site_survey_ping_server, auto_upload_to_rcms, ignored_networks, speedtest_count, allow_auto_survey, allow_timed_survey, periodic_testing, daily_testing_time, network_selection |
show_networks | Display Smart Roaming network entries. This is a standalone command. | Standalone command; not a show subcommand. |
| Command | Description | Subcommands |
|---|---|---|
show gre all | Display GRE settings. | all, tunnel |
show ipsec all | Display IPsec settings. | all, keepalive, optimize_dh_exponent_size, debug_enable, debug_level, enable_backup, monitor_interval, monitor_times, retransmit_tries, tunnel |
show openvpn all | Display OpenVPN settings. | all, tunnel, password_manage, client_manage |
show wireguard all | Display WireGuard settings. | all, enable, private_key_secrets, address, listen_port, mtu, nat_enable, peer_settings |
| Command | Description | Subcommands |
|---|---|---|
show ai all | Display analog input settings. Example output is not available. | all; other options not confirmed. |
show dido all | Display digital input and output settings. | all, di, do |
show do_scheduler all | Display digital output scheduler settings. | all, set |
show gps all | Display GPS settings. | all, enable, sync_gps_time, sync_gps_time_interval, report_to_rs232, rs232_num, rs232_nmea_gpgga, rs232_nmea_gpvtg, rs232_nmea_gprmc, rs232_nmea_gpgsv, rs232_nmea_gngsa, rs232_nmea_gngns, rs232_nmea_glgsv, server, remove_lf_character, self_define_gpsid, self_define_gpsid_header, add_sn_as_gpsid, transmit_interval |
show redirector all | Display serial redirector settings. Example output is not available. | all; other options not confirmed. |
show serial_port all | Display serial port settings. Example output is not available. | all; other options not confirmed. |
show usb all | Display USB settings. | all, enable, auto_update |
The Subcommands column lists direct options from device help. An option can require an index or additional fields; use context help for the complete syntax. Options and availability can vary by device. Where device help is unavailable, only the documented all option is shown.
Each example shows a command followed by the output observed on the test device. Returned values reflect that device at the time of the query.
Example output is not available for this command.
Sanitized; lines may be omitted.
# show ddns all
enable = false
server_type = dyndns
hostname = ""
username = <redacted>
password = <redacted>
url = ""
tries = 3
checkip = ""
enable_fake_address = falseSanitized; lines may be omitted.
# show email all
enable = false
tls_enable = false
starttls_enable = false
outgoing_server = ""
port = 25
timeout = 10
auth_login = false
username = <redacted>
password = <redacted>
from = ""
subject = ""Sanitized; lines may be omitted.
# show event all
csq_threshold = 0
rsrp_threshold = 0
temperature_threshold = 0Sanitized; lines may be omitted.
# show ntp all
timezone = 8
expert_setting = ""
client_enable = true
primary_server = pool.ntp.org
secondary_server = ""
update_interval = 0
network_port = default
server_enable = false
nitz_enable = false
nitz_update_interval = 0Sanitized excerpt; remaining lines omitted.
# show rcms all
enable = true
rlink_enable = true
rvpn_enable = true
detail_enable = false
frpc_log_enable = true
reg_addr_type = RCMS_Cloud_International
reg_addr = rcms-cloud.robustel.net
port = 443
ipv6_preferred = false
keepalive = 600
keepalive_custom = 600
read_interval = 60
upload_frequency = 60
gps_report_method = Trigger
gps_distance_threshold = 20
pingenable = <redacted>
primary_server = 8.8.8.8
timeout = 5
count = 3
system_startup = false
system_time_updated = false
config_changed = false
cellular_network_type_changed = false
cellular_data_stats_clear = false
...Sanitized; lines may be omitted.
# show reboot all
period = 0
daily_time = ""Sanitized excerpt; remaining lines omitted.
# show req_auth all
settings {
id = 1
role = Guest
others = 1
cellular = 1
wifi = 1
wlan = 1
usb = 1
link_manager = 1
lan = 1
ethernet = 1
dido = 1
policy_route = 1
pppoe_bridge = 1
ip_passthrough = 1
route = 1
qos = 1
firewall = 1
gre = 1
wireguard = 1
openvpn = 1
ipsec = 1
ddns = 1
rcms_portal = 1
...Sanitized; lines may be omitted.
# show security all
enable = true
fail_count = 10Sanitized; lines may be omitted.
# show sms all
sms_mgmt_enable = true
auth_type = password
sms_mgmt_phonenum = <redacted>
dcs = gsm_7Sanitized; lines may be omitted.
# show ssh all
enable = true
port = 22
disable_passwd_login = <redacted>Sanitized; lines may be omitted.
# show syslog all
enable = true
level = debug
save_position = ram
log_to_remote = false
add_identifier = false
remote_ip = ""
remote_port = 514
backup_remote_ip = ""
backup_remote_port = 514# show system all
device_name = router
usr_led_type = noneThe output includes device_name and usr_led_type.
Sanitized; lines may be omitted.
# show user_management all
username = <redacted>
password = <redacted>
usb_key = <redacted>
root_password = <redacted>
idle_timeout = 600Sanitized; lines may be omitted.
# show web_server all
http_port = 80
https_port = 443
http_redirect_to_https = trueSanitized; lines may be omitted.
# show captive_portal all
enable = true
www_position = system
client_network = 192.168.137.0
client_netmask = 255.255.255.0
home_url = ""
redir_url = ""
download_volume = 0
upload_volume = 100
maxdown_bw = 0
maxup_bw = 0
session_timeout = 0
idle_timeout = 100
total_time = 1440
reset_every = 1
start_time = 08:00
en_alert = false
enable_log = false
allowed_networks = ""
domainaddress = ""
allowed_clients = ""
expert = ""
probe_domains = ""Excerpt from the response; remaining lines are omitted.
# show ethernet all
port_setting {
id = 1
port = eth0
port_assignment = lan0
poe_enable = false
port_enable = true
port_speed = auto
vlan_tag_enable = false
tag_value = 1
}
port_setting {
id = 2
port = eth1
port_assignment = lan0
poe_enable = false
port_enable = true
port_speed = auto
vlan_tag_enable = false
tag_value = 1
}
port_setting {
id = 3
port = eth2
port_assignment = lan0
...Each port_setting entry includes a port, its assignment, enable setting and configured speed. Use status ethernet to view the reported link state.
Sanitized; lines may be omitted.
# show firewall all
filtering_enable = true
default_filter_policy = accept
remote_input_policy = accept
local_input_policy = accept
remote_ssh_access = true
local_ssh_access = true
remote_telnet_access = true
local_telnet_access = true
remote_http_access = true
local_http_access = true
remote_https_access = true
remote_ping_respond = <redacted>
dos_defending_enable = true
vpn_nat_traversal_enable = false
ping_forward_limit = <redacted>
sip_enable = true
ftp_enable = true
dmz_enable = false
dmz_host = ""
dmz_source = ""
ipset_enable = false
default_input_policy = accept
mac_list_name = ******
mac_list_action = ******
ip_port_list_name = ip-port
ip_port_list_action = drop
net_list_name = net
net_list_action = dropThe test device returned to the prompt without displaying configuration output.
# show ieee8021x allSanitized; lines may be omitted.
# show ip_passthrough all
enable = falseExcerpt from the response; remaining lines are omitted.
# show lan all
network {
id = 1
interface = lan0
ip = 192.168.0.1
netmask = 255.255.255.0
connection_type = delegated
prefix = ""
static_nat = true
ipv6_addr_allocation_type = slaac
mtu = 1500
vlan_id = 0
dhcp {
enable = true
mode = server
relay_server = ""
pool_start = 192.168.0.2
pool_end = 192.168.0.100
netmask = 255.255.255.0
gateway = ""
primary_dns = ""
secondary_dns = ""
wins_server = ""
lease_time = 120
static_lease = ""
...In this example, interface = lan0 identifies the LAN interface. The ip and netmask values identify its configured IPv4 address and subnet mask. Under dhcp, enable = true and mode = server show that the DHCP server is enabled; pool_start and pool_end give the configured address-pool limits. These settings do not by themselves confirm that a client has obtained a lease.
Sanitized excerpt; remaining lines omitted.
# show link_manager all
primary_link = wwan1
backup_link = none
backup_mode = cold_backup
revert_interval = 0
emergency_reboot = false
link {
id = 1
type = wwan1
desc = ""
ipv6_enable = false
connection_type = dhcp
ipv6_connection_type = slaac
ipv6_PPPoE_address_mode = slaac
wwan {
sim_slot = sim1
auto_apn = true
apn = internet
apn_polling = false
username = <redacted>
password = <redacted>
dialup_number = *99***1#
auth_type = auto
ppp_preferred = false
switch_by_data_allowance = false
...Sanitized; lines may be omitted.
# show policy_route all
enable = false
blink_drop_conn = false
ignore_dns_for_backup = falseSanitized; lines may be omitted.
# show pppoe_bridge all
enable = false
username = <redacted>
password = <redacted>
lcp_echo_interval = 30
lcp_echo_failure = 5Sanitized; lines may be omitted.
# show qos all
enable = false
priority {
id = 1
priority = highest
bandwidth = 20
borrow_enable = true
}
priority {
id = 2
priority = high
bandwidth = 20
borrow_enable = true
}
priority {
id = 3
priority = normal
bandwidth = 20
borrow_enable = true
}
priority {
id = 4
priority = low
bandwidth = 20
borrow_enable = true
}
priority {
id = 5
priority = lowest
bandwidth = 20
borrow_enable = true
}The test device returned to the prompt without displaying configuration output.
# show route allSanitized excerpt; remaining lines omitted.
# show wifi all
mode = both
client_band = 2_4g
region = SE
oem_prefix = support
oem_content = RBT
enable = true
wireless_mode = 11axg
bandwidth_20 = 20
bandwidth_40 = 40
channel_2g = 0
ssid_2g = <redacted>
broadcast_ssid = <redacted>
security_mode = wpa_personal
wpa_version = wpa2wpa3
encryption = aes
psk_password = <redacted>
auth_server_addr = ""
auth_server_port = 1812
auth_server_secret = <redacted>
key_update_interval = <redacted>
wep_secret = <redacted>
radius_addr = 0.0.0.0
radius_port = 1812
radius_secret = <redacted>
...Sanitized; lines may be omitted.
# show wlan all
enable = falseSanitized excerpt; remaining lines omitted.
# show cellular all
sim {
id = 1
card = sim1
phone_number = <redacted>
pin_code = <redacted>
mcc_mnc = ""
extra_at_cmd = ""
telnet_port = 0
auto_update_apn = 90
sms_max_limit = 0
sms_billing_day = 1
network_type = auto
band_select_type = all
band_settings {
gsm_850 = false
gsm_900 = false
gsm_1800 = false
gsm_1900 = false
wcdma_800 = false
wcdma_850 = false
wcdma_900 = false
wcdma_1700 = false
wcdma_1800 = false
wcdma_1900 = false
...Sanitized; lines may be omitted.
# show smart_roaming all
enable = true
check_period = 5
rssi_quality_check = false
rssi_quality_gsm = -85
rssi_quality_wcdma = -95
rssi_quality_lte = -100
rsrp_quality_check = false
rsrp_quality_lte = -100
rsrp_quality_5g = -100
rsrq_quality_check = false
rsrq_quality_lte = -20
rsrq_quality_5g = -20
sinr_quality_check = false
sinr_quality_lte = 1
sinr_quality_lte_pcc = 1
network_delay_check = false
network_delay = 3000
packet_loss_rate_check = false
packet_loss_rate = 70
primary_server = 8.8.8.8
secondary_server = 114.114.114.114
timeout = 5
tries = 10
use_degraded_networks = false
period = 0
daily_time = ""
preferred_operator_list = ""Sanitized; lines may be omitted.
# show sr_site_survey all
site_survey_enable = true
site_survey_ping_server = <redacted>
auto_upload_to_rcms = true
ignored_networks = ""
speedtest_count = 1
allow_auto_survey = false
allow_timed_survey = false
periodic_testing = 0
daily_testing_time = ""
network_selection = previous_network# show_networks
46000:5G;46015:N/A;46011:N/A;46001:N/A;The response contains network entries with reported values such as 5G and N/A.
The test device returned to the prompt without displaying configuration output.
# show gre allSanitized; lines may be omitted.
# show ipsec all
keepalive = 20
optimize_dh_exponent_size = false
debug_enable = false
debug_level = -1
enable_backup = false
monitor_interval = 30
monitor_times = 5
retransmit_tries = 5The test device returned to the prompt without displaying configuration output.
# show openvpn allSanitized; lines may be omitted.
# show wireguard all
enable = false
private_key_secrets = <redacted>
address = ""
listen_port = 51820
mtu = 1472
nat_enable = trueExample output is not available for this command.
Sanitized; lines may be omitted.
# show dido all
di {
id = 1
enable = false
mode = on_off
inversion = false
clr_dicounter_timer = 0
clr_dicounter_timer_minute = 0
clr_dicounter_time = 0
clr_reserve = 0
clr_reserve_timer = 0
clr_reserve_minute = 0
threshold = 0
alarm_on_content = "Alarm On"
alarm_off_content = "Alarm Off"
}
do {
id = 1
enable = false
alarm_on_action = high
alarm_off_action = low
initial_state = last
delay = 0
hold_time = 0
pulse_low = 10
pulse_high = 10
di_trigger = true
alarm_source = none
}Sanitized; lines may be omitted.
# show do_scheduler all
set {
id = 1
port = 1
enable = false
invert_logic = false
sunday = ""
monday = ""
tuesday = ""
wednesday = ""
thursday = ""
friday = ""
saturday = ""
}Sanitized; lines may be omitted.
# show gps all
enable = false
sync_gps_time = false
sync_gps_time_interval = 0
report_to_rs232 = false
rs232_num = com1
rs232_nmea_gpgga = false
rs232_nmea_gpvtg = false
rs232_nmea_gprmc = false
rs232_nmea_gpgsv = false
rs232_nmea_gngsa = false
rs232_nmea_gngns = false
rs232_nmea_glgsv = false
remove_lf_character = false
self_define_gpsid = None
self_define_gpsid_header = ""
add_sn_as_gpsid = ******
transmit_interval = 1Example output is not available for this command.
Example output is not available for this command.
Sanitized; lines may be omitted.
# show usb all
enable = true
auto_update = false