Check Smart Roaming Status Using the RobustOS CLI

Check Smart Roaming status using the RobustOS CLI

Use the RobustOS command-line interface (CLI) to inspect Smart Roaming status and check whether the feature is enabled.

Applies to: R5030-A-5G-A25GL running RobustOS 5.6.0. Commands and output can vary on other models or firmware.

Before you begin

Connect to the device CLI using an authorized account. See Get started with the RobustOS CLI for SSH connection instructions.

Check Smart Roaming status

At the device CLI prompt, enter:

status smart_roaming

The device displays Smart Roaming status. Depending on its configuration and current state, the output can include the selection mode, operator information and recent survey records. Available information can vary.

Check whether Smart Roaming is enabled

To inspect the configured enable setting, enter:

show smart_roaming enable

The output contains the smart_roaming.enable setting. Checking this setting does not change it.

Important: Use smart_roaming in these commands. Check the built-in CLI help for the syntax available on your device.

Related information