Connect a computer to your device’s local management port, then open the RobustOS Web interface in a browser. Some details vary by model, so have your device’s model name and hardware guide to hand before you begin.

Connect your computer

1. Connect your computer to the Ethernet port used for local management on your model.
2. Set the computer to obtain an IP address automatically, or give it a static IP address in the same subnet as the device.
3. Open a web browser and enter the device’s management address.

Many RobustOS devices use 192.168.0.1 by default, but the address can vary by model. If you are unsure, check the product label or your model’s hardware guide.

Sign in

Use the username and password supplied with your device or printed on its label. If the Web interface asks you to change the administrator password, set a new password before you continue.

If you can’t reach the sign-in page

• Check the Ethernet connection between your computer and the device.
• Confirm that your computer has an IP address in the same subnet as the device.
• Make sure you are using the correct management address for your model.

Related information

• Find your RobustOS model, firmware version, and connection status
• Save, apply, and reboot RobustOS configuration changes