E2C Factory软件安装手册
软件管理
软件获取
若网关出厂时没有预装E2C Factory软件，您可以自行按照4.2节的步骤进行安装，安装包可联系销售或者客服获取。
安装软件
在鲁邦通的边缘计算网关中，可通过网关控制台直接在线安装数采软件，具体操作步䠫如下
- 准备
准备好必要的安装包，如：e2c-factory-x.x.x.x.rpk
- 步骤1
网关上电，打开浏览器访问 http://192.168.0.1 。输入用户名（缺省为admin）与密码（缺省为admin）进行登录
可从网关WEB首页中查看到固件版本信息，如下图所示，固件版本要求：>= 2.3.106
注意： 若版本较低，请联系客服或销售人员获取最新的固件进行升级，具体的升级操作可参考《ROS Pro用户手册》
- 步骤2
点击【System系统】-【App Center应用中心】，选择文件，点击【install安装】，点击弹窗“OK”按钮即可完成安装，设备将会自动重启，重新登录并再次进入该页面即可看到APP已经安装成功。
卸载软件
可以在【System系统】-【App Center应用中心】中选中e2c-factory进行卸载操作。
卸载APP：点击【System】-【App Center】，点击”X”。
点击“OK”按钮即可完成卸载，设备将会自动重启。
重新登录并进入该页面可见到APP已经卸载成功。
启用与禁用
在边缘计算网关中，默认启用数采软件。
点击【Edge computing边缘计算】-【E2C Factory】的Enable开关可进行启用和禁用切换。
进入软件主界面
安装完成后，可在左侧菜单栏中找到【Edge Computing边缘计算】或顶部的【Edge Computing边缘计算】 菜单项，点击可打开E2C Factory软件的操作页面。
操作页面将在新的标签页打开，呈现如下图所示的软件主页面。
Related Articles
Omron HostLink Data Collection Guide
1. Protocol Overview Protocol Description: HostLink is a serial communication protocol developed by Omron for its PLC products, primarily used for data exchange and monitoring between host systems (such as programming software, HMI, or SCADA) and ...Melsec MC 3E Data Collection Guide
1. Protocol Overview Protocol Description: The MC 3E (Melsec Communication Protocol 3E) is a proprietary Ethernet communication protocol developed by Mitsubishi Electric for its Q, L, and iQ-R series PLCs. The protocol supports both Binary and ASCII ...Omron HostLink over TCP Data Collection Guide
1. Protocol Overview Protocol Description: HostLink is a serial communication protocol developed by Omron for its PLC products. "HostLink over TCP" is an implementation that encapsulates this serial protocol within TCP/IP, allowing host systems or ...Omron FINS TCP Data Collection Guide
1.Protocol Overview Protocol Description: FINS (Factory Interface Network Service) is a communication protocol developed by Omron for its PLC series (e.g., CP, CJ, and CS series) to facilitate data exchange between PLCs and host systems (such as HMI ...OPC UA Data Collection Guide
1. Protocol Overview Protocol Description: Modbus TCP is a common industrial automation protocol based on TCP/IP network transmission. Application Scenarios: This protocol is widely used for data acquisition and control of devices such as PLCs, ...