Reset a RobustOS Device to Default or Factory Settings

Reset a RobustOS device to its default or factory settings

Use the RST button to restore your device’s default configuration. To restore the factory configuration, repeat the reset within one minute.

Before you begin

Warning: Restoring the factory configuration cannot be undone. User-specific data, settings and stored information are erased. Back up the configuration and any data you need before you continue.

Restore the default configuration

  1. While the device is running, press and hold RST for 5–10 seconds.
  2. Release the button when the RUN indicator starts flashing rapidly.

The device restores its default configuration.

Restore the factory configuration

  1. Restore the default configuration as described above.
  2. Within one minute, repeat the same RST button operation.

The device restores its factory configuration.

After the reset

Check your model’s documentation for the management address, then sign in with the default credentials for your model, such as those on the product label. For help, see Connect to and sign in to the RobustOS Web interface.