Getting Started
View route status using the RobustOS CLI
Use the RobustOS command-line interface (CLI) to view route information reported by the device. Before you begin Connect to the device CLI using an authorized account. See Get started with the RobustOS CLI for SSH instructions. Display route status ...
Check Smart Roaming status using the RobustOS CLI
Use the RobustOS command-line interface (CLI) to inspect Smart Roaming status and check whether the feature is enabled. Applies to: R5030-A-5G-A25GL running RobustOS 5.6.0. Commands and output can vary on other models or firmware. Before you begin ...
Robustel products that run RobustOS
RobustOS runs on a range of Robustel modems and routers. This page lists current Robustel products that use RobustOS and summarizes their main interfaces. Product names and lineups change over time. Check the model label on your device, then use its ...
Find your RobustOS model, firmware version, and connection status
When you contact Robustel Support, include your device model and firmware version. This helps us confirm that the instructions match your device and narrow down the issue faster. Find your model and firmware version Sign in to the device’s Web ...
Connect to and sign in to the RobustOS Web interface
Connect a computer to your device’s local management port, then open the RobustOS Web interface in a browser. Some details vary by model, so have your device’s model name and hardware guide to hand before you begin. Connect your computer Connect your ...
Save, apply, and reboot RobustOS configuration changes
Use these controls to save edits, apply the configuration, and restart the device when required. What each control does Submit saves edits on the current page. Save & Apply saves the current configuration and applies your changes. Reboot restarts the ...